Country of manufacture: Japan

Description:
Cleaning is made smooth and easy with little force while powerfully catching dirt! The 3D capture power head absorbs dirt completely by using the the entire sheet. Small head design for flexible usability. You can easily clean with one hand as it weighs only 340g. Easy to use and stress-free design. With locking slim joint that does not come loose even after repeated use and a rubber cap that stops the wiper from falling over even when left leaning against the wall.

Usage method:
[assemble wipers]
(written in the enclosed instruction manual)
Please read the instruction manual inside for how to assemble.

Put the button and the concave groove together until you hear a snap.
(grip, 3 pipes, 4 heads in total)
All pipes are the same.
After assembly, please make sure that all parts (grip, pipe, head) do not come out.
You can also use it by connecting a short pipe (with one or two).

[seat installation]
(written in the enclosed instruction manual)
1. Spread the sheet and place the head in the middle.
2. Wrap the sheet so that the head is wrapped, and push it into the insertion opening (4 places). At this time, if you press firmly, the sheet is hard to come off.

[when disassembling the wiper]
(written in the enclosed instruction manual)
1. Press the button firmly and push the ring.
2. Just pull it out.
! If you hold the ring with your finger, it won't come off even if you push the button.
Pull out the grip and head in the same way.

Caution:
Do not use it for other purposes. If the pipe is dropped, it may be damaged.
If you use too much force, it will break.
To remove the handle (handle), hold down the button on the handle (handle) and pull it out. (if the pushing force is weak, the connection part may be broken.)
When dirty, blot water and dry in the shade. When dirt is serious, wipe with neutral detergent diluted liquid before blistering. (alkaline and acidic detergents may alter the head.)
When installing the seat, if you put your finger too deep into the insert, you may pinch your finger. Be especially careful with small children.
Do not install anything other than a special seat.
Please read the use, use and precautions of the special sheet carefully before use.

The cushion of the head and the seat insert will deteriorate and become fragile after a long period of use. If damage becomes severe, please replace it with a new quick wiper. Please keep the package and the enclosed instruction manual.

Main materials:
[set contents]
Quick wiper body
(grip: 1, pipe handle: 3, head: 1)
· three-dimensional adsorption dry sheet (1 piece)
· three-dimensional adsorption wet sheet, no fragrance left type (1 piece)

[material]
Pipe (handle)
Aluminum, polycarbonate, polyacetal
gripping
Polypropylene, styrene elastomer, polyacetal, polycarbonate
Head plate
Abs resin, polycarbonate, polyethylene, polyacetal, foam urethane, polypropylene
Cushion part
Styrene elastomer